HeadRush Pedalboard - Exiting the firmware update mode and loading screen

If your HeadRush Pedalboard ever gets stuck in 'loading' screen, here's a quick way to resolve this.  First, if your screen says loading, the unit is likely stuck waiting for an update.  We just need to snap it out of this mode so that it can boot normally again.  

  1. Power on the unit while holding down buttons 1, and 8 (counting from left to right, starting with the upper-left button).  
    This will put the pedal board into firmware update mode, and allow it to successfully boot.  
  2. Once the pedalboard boots up, turn it off, then back on again.  This will allow it to boot normally (not in update mode).

 

 

Further Technical Support

Whether you are a customer or dealer, if you already own a HeadRush product, or if you just have a pre-sales question, the HeadRush technical support team is available to help!

Visit the link below to connect with any of the following support options: online community, support, phone support, email support.